#25 Animation Day 3

Now I'm finished with this assignment and this is the final outcome. We used Photoshop to create an animation button. To create an animated button go to Window and then animation to start making this button. After learning how to make things animated I also learned the use of using a .GIF . This type of software is for animation. I learned a lot in this assignment.

#25 Animation Day 2

This is the result of the 2nd day in the process of finishing this assignment. We are creating a glowing button in Photoshop by following the instructions given to us.

#25 Animation Day 1

This is the result of the 3rd day in the process of finishing this assignment. We are creating a glowing button in Photoshop by following the instructions given to us.

#24 3d effect in Photoshop

In this task we learned how to use photoshop to make a picture 3D in this case we made the house we created in Photoshop 3D. We had to choose a location for your house and open both .jpg's in Photoshop, the house and we set the foreground blue by checking off the red channel. Then duplicate the and check off G and B.  Lastly just move the last layer a little and your done.

#23 Lakeside Bungalow Day 4

This task we were able to use all the tools and technicians we learned in sketchup to create a realistic house.  This task was a very long and complicated, I hope to never do this again. We used most of the tools in sketch up to create this house. We used: push/pull, pencil, rectangle, circle, paint bucket, eraser, orbit, and camera .

#23 Lakeside Bungalow Day 3

This task we were able to use all the tools and technicians we learned in sketchup to create a realistic house.  This task was a very long and complicated, I hope to never do this again. We used most of the tools in sketch up to create this house. We used: push/pull, pencil, rectangle, circle, paint bucket, eraser, orbit, and camera .

#23 Lakeside Bungalow Day 2

This task we were able to use all the tools and technicians we learned in sketchup to create a realistic house.  This task was a very long and complicated, I hope to never do this again. We used most of the tools in sketch up to create this house. We used: push/pull, pencil, rectangle, circle, paint bucket, eraser, orbit, and camera .

Quiz Block #3 Rahima

#21 A,B,&C

In this task we learned how to use sketchup for the first time . We learned how to use the shapes like circle and rectangle to create our first name and we used the push/pull tool as well to make our name pop out. In this practice we learned how to go from a simple 2D shape to a 3D shape. We learned how to use the eraser to correct any errors we did.

#22 BLOCK 12

For this assignment I used Sketch-Up to create this 3 dimensional shape. I used the "Line" drawing tool and used the keyboard to enter the dimensions and length of the lines drawn. After that I used the tape measure tool to divide the shapes and add different levels to the 3D shape I made . I later used the push and pull tool to add different aspects in the shape I formed.
Here are the dimensions:

 Block6: X= __9___ feet   

               Y= __4___ feet               

               Z= __6___ feet               

#22 BLOCK 11

For this assignment I used Sketch-Up to create this 3 dimensional shape. I used the "Line" drawing tool and used the keyboard to enter the dimensions and length of the lines drawn. After that I used the tape measure tool to divide the shapes and add different levels to the 3D shape I made . I later used the push and pull tool to add different aspects in the shape I formed.
Here are the dimensions:

 Block6: X= __10___ feet   

               Y= __5___ feet               

               Z= __6___ feet               

#22 BLOCK 10

For this assignment I used Sketch-Up to create this 3 dimensional shape. I used the "Line" drawing tool and used the keyboard to enter the dimensions and length of the lines drawn. After that I used the tape measure tool to divide the shapes and add different levels to the 3D shape I made . I later used the push and pull tool to add different aspects in the shape I formed.
Here are the dimensions:

 Block6: X= __11___ feet   

               Y= __3____ feet               

               Z= __3___ feet               

#22 BLOCK 9

For this assignment I used Sketch-Up to create this 3 dimensional shape. I used the "Line" drawing tool and used the keyboard to enter the dimensions and length of the lines drawn. After that I used the tape measure tool to divide the shapes and add different levels to the 3D shape I made . I later used the push and pull tool to add different aspects in the shape I formed.
Here are the dimensions:

 Block6: X= __10___ feet   

               Y= __4___ feet               

               Z= __6___ feet               

#22 BLOCK 8

For this assignment I used Sketch-Up to create this 3 dimensional shape. I used the "Line" drawing tool and used the keyboard to enter the dimensions and length of the lines drawn. After that I used the tape measure tool to divide the shapes and add different levels to the 3D shape I made . I later used the push and pull tool to add different aspects in the shape I formed.
Here are the dimensions:

 Block6: X= __9___ feet   

               Y= __5___ feet               

               Z= __5___ feet               

#22 BLOCK 7

For this assignment I used Sketch-Up to create this 3 dimensional shape. I used the "Line" drawing tool and used the keyboard to enter the dimensions and length of the lines drawn. After that I used the tape measure tool to divide the shapes and add different levels to the 3D shape I made . I later used the push and pull tool to add different aspects in the shape I formed.Here are the dimensions:

#19b

In this assignment  I use  the minus  front,  divide, and ellipse tool.  These effects change the visual of two shapes that are together. Changing the outline of it better prepared me for the phone assignment.

#19

For this assignment I used Adobe Illustrator to make my last name by using a combination of shapes. I used the shape tool box and the ellipse tool to combine the shapes.

#22 BLOCK 6

For this assignment I used Sketch-Up to create this 3 dimensional shape. I used the "Line" drawing tool and used the keyboard to enter the dimensions and length of the lines drawn. After that I used the tape measure tool to divide the shapes and add different levels to the 3D shape I made . I later used the push and pull tool to add different aspects in the shape I formed.
Here are the dimensions:

 Block6: X= __9___ feet   

               Y= __5___ feet               

               Z= __6___ feet                

#22 BLOCK 5

For this assignment I used Sketch-Up to create this 3 dimensional shape. I used the "Line" drawing tool and used the keyboard to enter the dimensions and length of the lines drawn. After that I used the tape measure tool to divide the shapes and add different levels to the 3D shape I made . I later used the push and pull tool to add different aspects in the shape I formed.
Here are the dimensions:
 

Block5: X= __8___ feet   

            Y= __5___ feet           

            Z= __5___ feet             

#22 BLOCK 4

For this assignment I used Sketch-Up to create this 3 dimensional shape. I used the "Line" drawing tool and used the keyboard to enter the dimensions and length of the lines drawn. After that I used the tape measure tool to divide the shapes and add different levels to the 3D shape I made . I later used the push and pull tool to add different aspects in the shape I formed.
Here are the dimensions:

Block4: X= __7___ feet

            Y= __7___ feet

             Z= __4___ feet

#22 BLOCK 3

For this assignment I used Sketch-Up to create this 3 dimensional shape. I used the "Line" drawing tool and used the keyboard to enter the dimensions and length of the lines drawn. After that I used the tape measure tool to divide the shapes and add different levels to the 3D shape I made . I later used the push and pull tool to add different aspects in the shape I formed.
Here are the dimensions:
       Block 3: X= __9___ feet 

                      Y= __4___ feet              

                      Z= __6___ feet                

#22 BLOCK 2

For this assignment I used Sketch-Up to create this 3 dimensional shape. I used the "Line" drawing tool and used the keyboard to enter the dimensions and length of the lines drawn. After that I used the tape measure tool to divide the shapes and add different levels to the 3D shape I made . I later used the push and pull tool to add different aspects in the shape I formed.
Here are the dimensions:

   Block2: X= __8___ feet   

               Y= __5___ feet                

               Z= ___5__ feet                 

#22 BLOCK 1

For this assignment I used Sketch-Up to create this 3 dimensional shape. I used the "Line" drawing tool and used the keyboard to enter the dimensions and length of the lines drawn. After that I used the tape measure tool to divide the shapes and add different levels to the 3D shape I made . I later used the push and pull tool to add different aspects in the shape I formed.
 Here are the dimensions:
 

Block1: X= __8__ feet    

            Y= __5___ feet           

            Z= __5___ feet              

#22: Isometric blocks 3rd marking period

Block1: X= __8__ feet    Block2: X= __8___ feet   Block 3: X= __9___ feet   Block4: X= __7___ feet

            Y= __5___ feet               Y= __5___ feet                Y= __4___ feet                Y= __7___ feet

            Z= __5___ feet               Z= ___5__ feet                 Z= __6___ feet                Z= __4___ feet

Block5: X= __8___ feet    Block6: X= __9___ feet   Block 7: X= __8___ feet   Block8: X= __9___ feet

            Y= __5___ feet               Y= __5___ feet                Y= __5__ feet                Y= __5___ feet

            Z= __5___ feet               Z= __6___ feet                 Z= __5___ feet                Z= __5___ feet

Block9: X= __10___ feet    Block10: X= __11___ feet   Block 11: X= __10___ feet   Block12 X= __9___ feet

            Y= ___4__ feet                 Y= __3___ feet                  Y= __5___ feet                Y= __4___ feet

            Z= ____6_ feet                 Z= __3___ feet                   Z= __6___ feet                Z= __6___ feet

which 2 axes makes the top view = _x__& _z_ , front view = _x_ & _y_, RSV = _y_ & _z_

#20

This is a phone I created using Adobe illustrator. For this project I used offset path, gradient, shape creator (rectangle, Square, circle), ellipse tool, minus front tool,distort, and transform tool. This project involved a lot of steps and took 4 days for me to complete.